Enerdrive DC2DC 12/24v 30 Amp Charger (24v Battery bank)
Enerdrive ePOWER 12/24v 30Ah Battery Charger & MPPT Controller
The Enerdrive ePOWER DC2DC Battery Charger is an all in one charging system incorporating a smart BATTERY CHARGER and MPPT SOLAR CHARGE CONTROLLER.
- The Enerdrive Charger has a 24v charging output for charging 24v Deep Cycle battery bank from 12v or 24v alternator/electrical systems while the engine is running.
- The Enerdrive Charger also features an in-built MPPT Solar Charge Controller for charging 24v Deep Cycle batteries via Solar Panels when stationary.Features:
- Input Voltage: 12/24V
- Output Voltage: 24V
- Output Amps: 30A
- Two totally independent DC Inputs to enable engine charging and solar charging 24v Deep Cycle battery banks.
- DC M6 screw terminals that will allow for large battery cable connection between all sources.
- A dedicated Maximum Power Point (MPPT) solar regulator.
- Charges Gel, AGM, Wet Flooded and Lithium batteries with the ability to create a full custom charging profile.
- Vehicle input allows for either 12v or 24v systems and a maximum Solar input of 45v/800w.
- 30A output up to 40+°C with thermo controlled fan cooling.
- Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage.
- Temperature sensor included in charger for more accurate battery charging.
- The ePOWER Battery Charger features multistage smart charging technology that enables the charger to be connected to your battery bank permanently.
- Dimensions: (L)242 (W)172 (H)74mm
- Weight: 1.85Kg